Frosted glass?
What is the best way to clean frosted glass? I used a glass lens cleaner and now it seems that horrible. It is scratched. Thanks.
With hot water and vinegar, then wipe dry with a soft cloth
What is the best bidet / WC or washlet for a disabled man who has to move the headquarters?
They are available for people with disabilities in Europe, but apparently not to any particular source of people with disabilities in North America (Canada, but we tried the U.S. too) So we are looking at the main service stream bidets that are not specifically for this purpose. We need something strong enough to transfer all the time.
the best services for people with disabilities are taken by a Japanese company called TOTO. see their website. I graduated from school recently and am familiar with the plumbing later. TOTO has a bathroom that is controlled equipment, and wash and air dry after business is served. are relatively easy to install, but you need a source of energy.
I have a glass sink and the unit in my bathroom. Each time you use gets horrible water spots blank.?
Can you avoid this? Thanks! Thanks for the replies! Rain-X is available in the UK?
Waterproof buy usually used for windshield Car (RainX) give the area a good cleaning sink and then once dry, rub with a bit of such things and amateur. The grain moisture and then run through the hole cap, leaving no stain and let dry waste. I use this in my car and can drive without wipers in the rain.
Can anyone turn me to a place where I can see a picture of a kitchen sink of the house with a hand pump?
Must 1890 or 1900.
Here are some that may be similar to what you are looking for: http://www.itwoodbenice.com/images/dry_sink.jpg http://www.westporthistory.org/images/Building&Grounds/kitchen_05_2.jpg http://www .shakerworkswest.com/images/SmalSink4.jpg
Kitchen Faucet Delta, reported of spray, and water always goes down the drain!?
Delta Faucet RP3614 model kitchen about 8 years? , Pulse the sprinkler and the water still goes down the drain! In fact, some water leaves the spray device, but maybe half of what it should be, the water remaining in the spout. Now I've changed all the parts inside the valve – cartridge ball o-rings, springs .. everything. including not know what else to try to connect. pipe looks like any plain – screw – faucet. I think if the background is locked, you can also make water out of the peak and reduce the pressure in the pipe? Does possible, what else can it be? Thanks for your help. Karim
Hello. "I used to be a customer service rep based Delta faucets in central Illinois .. Have you tried replacing the inverter and the tube should be replaced. I do not know why he sent the rp3614, S & S, O-rings, cam and packing with allen wrench keyhole. The ball had nothing to do with it. You are still under warranty, ask about rp28900 any color you have and the type of valve, a handful Kit RP320 and two handles, is one in another, like a white cane with four taps to loosen with a quater. Also a pencil water flow is normal, but most time you can cut Lil drops to zero. And then the years have csr to send the pieces twice, and if not working, they send a new faucet. But make sure DANCO not to use. Void Techincally Warr. and not put lubricant on the sides.